Chaszmyr
Aug 16, 12:19 PM
Wheres the "1,000,000th PowerBook G5 post" avatar?
odris
Apr 28, 09:18 AM
Anyone else?
lamonsas
May 6, 05:39 PM
yea but i dont want to wait another 3 weeks for that deal to come besides i dont need an ipod.
wdlove
Mar 18, 10:08 PM
I think Apple should take iCal, Mail and Address Book and make them into one application (yes, like Entourage, but better) that works seamlessly with iSync. Why should they be three individual apps that are integrated instead of one that "just works"? What would this app be called? What do you all think?
As it stands with my current situation, it there combined wouldn't be able to use any of them. Currently my Mail is locked.
As it stands with my current situation, it there combined wouldn't be able to use any of them. Currently my Mail is locked.
SirStrumalot
May 1, 02:21 PM
hello,
sorry what i meant was I uninstalled repo666. whatever it was and I dont see it on Cydia anymore. I still get at&t signal tho. is this a sign that my phone is factory unlocked. and I read up some reviews and they say that iphones in italy are all factory unlocked. really confused.. doesnt anyone know anything about Italy iphones?
Since your phone is on the 01.59 baseband, I would not rule out a software unlock. When you go into Cydia, and go to Manage>Sources do you see a source with the words "ultrasn0w" in it? And if so, when you click on that source, is ultrasnow installed? If not, then I think it's safe to assume your phone is either locked to AT&T, or officially unlocked.
Although, like someone mentioned before, I can confirm that iPhones in Italy are sold unlocked.
sorry what i meant was I uninstalled repo666. whatever it was and I dont see it on Cydia anymore. I still get at&t signal tho. is this a sign that my phone is factory unlocked. and I read up some reviews and they say that iphones in italy are all factory unlocked. really confused.. doesnt anyone know anything about Italy iphones?
Since your phone is on the 01.59 baseband, I would not rule out a software unlock. When you go into Cydia, and go to Manage>Sources do you see a source with the words "ultrasn0w" in it? And if so, when you click on that source, is ultrasnow installed? If not, then I think it's safe to assume your phone is either locked to AT&T, or officially unlocked.
Although, like someone mentioned before, I can confirm that iPhones in Italy are sold unlocked.
Digitalflick
Feb 11, 06:13 PM
Do not see iPad included under the Buyer's Guide tab. Is their one? Thanks
insomniac321123
May 1, 11:42 PM
I was experiencing the same problems as others after installing DP3.
That is, installation seemed ok, UNTIL it got to to "moving items into place" after which it hung.
I forced a restart, and ended up with the grey screen and spinning gear.
I followed insomniac321123's suggestion:
- rebooted to Snow Leopard
- opened the root Library folder
- opened the Updates folder and located the "lionswupdate.pkg"
Note: it was located in a folder named "041-0870"
The pathway is (root)/Library/Updates/041-0870/lionswupdate.pkg
- double-clicked that, re-ran the installer app.
- this time, when it got to the "moving items into place" segment, the task finished (in relatively short time) and I received "the installation was successful".
After this, I was able to restart and get a "good boot" to 10.7 build 11A444d.
Other observations:
When I _shut down_ Lion the first time after the update, it seemed to take extra time, with quite a bit of disk activity. I'm going to _guess_ that the problem may be due to files that normally get written at shutdown to be read at the next boot. These would normally be read and pre-loaded before the finder loaded, but could not be, hence the spinning wheel that prevented the finder from loading.
After I finally got a good boot after running the procedure above, and Lion corrected whatever it needed to correct at shutdown, subsequent shutdowns are "normal" again.
This was my experience exactly. I've been out of town, so I haven't been able to post very well.
Thats one of the big perks of having a second, more stable partition. Besides having another OS to fall back on, you still have access to the disk of the problematic OS.
That is, installation seemed ok, UNTIL it got to to "moving items into place" after which it hung.
I forced a restart, and ended up with the grey screen and spinning gear.
I followed insomniac321123's suggestion:
- rebooted to Snow Leopard
- opened the root Library folder
- opened the Updates folder and located the "lionswupdate.pkg"
Note: it was located in a folder named "041-0870"
The pathway is (root)/Library/Updates/041-0870/lionswupdate.pkg
- double-clicked that, re-ran the installer app.
- this time, when it got to the "moving items into place" segment, the task finished (in relatively short time) and I received "the installation was successful".
After this, I was able to restart and get a "good boot" to 10.7 build 11A444d.
Other observations:
When I _shut down_ Lion the first time after the update, it seemed to take extra time, with quite a bit of disk activity. I'm going to _guess_ that the problem may be due to files that normally get written at shutdown to be read at the next boot. These would normally be read and pre-loaded before the finder loaded, but could not be, hence the spinning wheel that prevented the finder from loading.
After I finally got a good boot after running the procedure above, and Lion corrected whatever it needed to correct at shutdown, subsequent shutdowns are "normal" again.
This was my experience exactly. I've been out of town, so I haven't been able to post very well.
Thats one of the big perks of having a second, more stable partition. Besides having another OS to fall back on, you still have access to the disk of the problematic OS.
Lostanddamned
Sep 24, 06:09 AM
If you are on Snow Leopard, then you need a slightly different version of Mirage Dock but once you have it set up it works beautifully, see attached image.
The Catalyst
Mar 23, 08:44 PM
Okay that says your not getting the 4.2.1 firmware to take...
Get firmware here; http://appldnld.apple.com/iPad/061-9857.20101122.VGthy/iPad1,1_4.2.1_8C148_Restore.ipsw
Note on a windows system you'll need to rename iPad1,1_4.2.1_8C148_Restore.zip to iPad1,1_4.2.1_8C148_Restore.ipsw
Is this what you are doing?
1). Get the latest TinyUmbrella.
2). Open TinyUmbrella
3). Plug in your device and save SHSH (make sure 4.2.1 SHSH were saved, if not don't bother continuing.
4). Start TSS Server (If you get errors read the help section or FAQs or comment below typically it fails because you have some kind of web sharing enabled... use google to fix it - your issue really not much I can do...)
5). Open iTunes
6). Select your device in iTunes
7). Shift(windows) / Option(Mac) restore -> Select the 4.2.1 ipsw (iPad1,1_4.2.1_8C148_Restore.ipsw)
Restore SHOULD error with a 1013 error. Click the "ok's" and close iTunes.
8). With your device sitting with the usb pointing to iTunes (recovery mode), enter DFU by pressing and holding HOME + POWER until your screen goes black... then after a count of 2 (1.5-2 seconds) let go of POWER but keep holding HOME. If all goes well you will see nothing but a black screen. If your timing is even a LITTLE bit off, you will see the apple logo and your phone will boot back into recovery mode... Go back to step 8 and try again.
Start 'Fix Recovery'
Click 'Yes'
Your device's screen will turn white and you'll see debug boot information.
Eventually your device will boot into the activation screen.d
Congrats. You're on 4.2.1 (again)? :)
Nice write up Dav1; good job.
Get firmware here; http://appldnld.apple.com/iPad/061-9857.20101122.VGthy/iPad1,1_4.2.1_8C148_Restore.ipsw
Note on a windows system you'll need to rename iPad1,1_4.2.1_8C148_Restore.zip to iPad1,1_4.2.1_8C148_Restore.ipsw
Is this what you are doing?
1). Get the latest TinyUmbrella.
2). Open TinyUmbrella
3). Plug in your device and save SHSH (make sure 4.2.1 SHSH were saved, if not don't bother continuing.
4). Start TSS Server (If you get errors read the help section or FAQs or comment below typically it fails because you have some kind of web sharing enabled... use google to fix it - your issue really not much I can do...)
5). Open iTunes
6). Select your device in iTunes
7). Shift(windows) / Option(Mac) restore -> Select the 4.2.1 ipsw (iPad1,1_4.2.1_8C148_Restore.ipsw)
Restore SHOULD error with a 1013 error. Click the "ok's" and close iTunes.
8). With your device sitting with the usb pointing to iTunes (recovery mode), enter DFU by pressing and holding HOME + POWER until your screen goes black... then after a count of 2 (1.5-2 seconds) let go of POWER but keep holding HOME. If all goes well you will see nothing but a black screen. If your timing is even a LITTLE bit off, you will see the apple logo and your phone will boot back into recovery mode... Go back to step 8 and try again.
Start 'Fix Recovery'
Click 'Yes'
Your device's screen will turn white and you'll see debug boot information.
Eventually your device will boot into the activation screen.d
Congrats. You're on 4.2.1 (again)? :)
Nice write up Dav1; good job.
baei1024
Apr 24, 08:30 PM
Now the description is updated. It is for just one day.
POPE76
Jun 23, 07:39 PM
I'll be there at 5 am just wondering if anybody was there for the Ipad launch how crazy where the lines?
Kafka
Apr 27, 12:14 PM
I personally moved from the 13"MBA to the 13"MBP because of that issue.
My eyes aren't too bad and I didn't get any headaches, but still, reading on the higher res was not too comfortable for me. I zoomed in pretty often in safari and numbers.
The extra space was very nice though...
In any case it seems to me that an higher pixel density will make your problem worse.
My eyes aren't too bad and I didn't get any headaches, but still, reading on the higher res was not too comfortable for me. I zoomed in pretty often in safari and numbers.
The extra space was very nice though...
In any case it seems to me that an higher pixel density will make your problem worse.
lokiju
Apr 19, 02:29 PM
This could be caused by several things:
Review: LG Ally for Verizon
Why it rocks: With the LG Ally
The Verizon LG Ally Iron Man 2
New LG Ally “Iron Man 2″
LG Ally Android 2.2
LG Ally, and Motorola
miniConvert
Jan 9, 10:51 AM
An Airport reliability fix for Intel iMacs would be nice. Too many threads on that one here. Goodness knows what Apple Discussions is like.
Mhm yeah, they definitely still haven't got Intel Mac airport sorted properly. My Mac mini worked like a charm until 10.4.8 as well, it was definitely that which screwed mine up!
Still, I doubt that'll be mentioned today.
Mhm yeah, they definitely still haven't got Intel Mac airport sorted properly. My Mac mini worked like a charm until 10.4.8 as well, it was definitely that which screwed mine up!
Still, I doubt that'll be mentioned today.
MacBytes
Feb 1, 09:44 AM
Category: Mac Websites
Link: iPod Mini Website, Grand Opening Coming Soon! (http://www.macbytes.com/link.php?sid=20040201104448)
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
Link: iPod Mini Website, Grand Opening Coming Soon! (http://www.macbytes.com/link.php?sid=20040201104448)
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
velocityg4
Apr 16, 07:12 AM
I preferred it as on the original Apples it was always referred to as the Apple key. Also it makes things easier when giving someone instructions over the phone. Now instead of saying let's say Apple S I have to say Command S. Then they say "what is command?", no one ever knows what the command key is. To which I have to reply the key by the space bar with the little box and four circles.
{1984}
Sep 24, 05:19 PM
i think apple shouldnt even go near a pda, i think pdas will just die in a year or so... CELLPHONES are where the money i at...
Bear
Sep 25, 06:31 AM
well the Nvidia does better in certain things while the 850 does better in others.
Also the 6800 allows for two 30" displays while no ATI allows that currently.
that being said i go for the ATIThe X850 XT does support a single 30" display + second display at lower (1920x1200 or less) resolution., while the 6800 GT DDL supports 2 of the 30" Displays.
Your reply almost makes it sound like the X850 XT doesn't support even one of the 30" displays.
Also the 6800 allows for two 30" displays while no ATI allows that currently.
that being said i go for the ATIThe X850 XT does support a single 30" display + second display at lower (1920x1200 or less) resolution., while the 6800 GT DDL supports 2 of the 30" Displays.
Your reply almost makes it sound like the X850 XT doesn't support even one of the 30" displays.
John.B
Jan 19, 09:41 AM
If I shine a bright light on the screen, I can see what is going on. Actually, I just know that pressing the power button and then the 'S' button puts a Mac to sleep. I then just let it sit for like 20 seconds, hit the space bar and it woke with the screen lit up.
I don't know that this method works every time. Sometimes I need to reboot the Mac. You do that buy hitting the power button and then the 'R' button.
Thanks, I learned something today. :)
I've always used the Cmd+Option+Eject shortcut for sleep, Control+Cmd+Eject for restart, and Control+Option+Cmd+Eject for shutdown.
I don't know that this method works every time. Sometimes I need to reboot the Mac. You do that buy hitting the power button and then the 'R' button.
Thanks, I learned something today. :)
I've always used the Cmd+Option+Eject shortcut for sleep, Control+Cmd+Eject for restart, and Control+Option+Cmd+Eject for shutdown.
Abstract
Sep 17, 08:14 PM
Some lucky guy gets to take a trip with Jesus!!
Haha, yes Jesus, "Peace" indeed. Oh that wacky Jesus.
Haha, yes Jesus, "Peace" indeed. Oh that wacky Jesus.
Flying Llama
Aug 17, 11:56 AM
Is it just me or is everyone starting to put links to their avatar submisions?
BTW I like it!
BTW I like it!
CP1091
Feb 5, 02:06 PM
Responded.. waiting for your response :)
robbieduncan
Apr 16, 02:46 AM
Dictionaries are in /Library/Dictionaries/
Each Dictionary is a bundle (with a .dictionary extension). Within each dictionary bundle in the resources is a (localised) xml file called <DictionaryName>.xml. You can parse the xml (the format looks quite simple) to get all the keys (and definitions if you want).
Each Dictionary is a bundle (with a .dictionary extension). Within each dictionary bundle in the resources is a (localised) xml file called <DictionaryName>.xml. You can parse the xml (the format looks quite simple) to get all the keys (and definitions if you want).
snberk103
Nov 8, 01:25 PM
My MBA shows the time as 2:10 AM. What gives? Shouldn't it be 1:10 now?
The time server is an time zone that hasn't switched yet, it may be still on the old time....
The time server is an time zone that hasn't switched yet, it may be still on the old time....
